Eastar? MN210, Natural
共聚多酯
Product Descript ion:
Meets ISO 10993 and/or USP Class VI biocompatibility requirement.
Eastar? Copolyester MN210, Natural is a brilliantly clear polymer with good impact strength, chemical resistance, dimensional stability, and low shrinkage rates. The slower rate of crystallization of this material makes it excellent for use in hot runner systems with valve or thermal gates.
This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED
The GREENGUARD INDOOR AIR QUALITY CERTIFIED Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more informationabout GEI and to obtain printable certificates for Eastman? Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.
Eastar? Copolyester MN210, Natural is a brilliantly clear polymer with good impact strength, chemical resistance, dimensional stability, and low shrinkage rates. The slower rate of crystallization of this material makes it excellent for use in hot runner systems with valve or thermal gates.
This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED
The GREENGUARD INDOOR AIR QUALITY CERTIFIED Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information
| 總覽 | ||||
材料狀態 |
| |||
資料 1 | ||||
搜索 UL 黃卡 | ||||
供貨地區 |
| |||
特性 |
| |||
用途 |
| |||
機構評級 |
| |||
外觀 |
| |||
形式 |
|
| 物理性能 | 額定值 | 單位制 | 測試方法 |
密度 / 比重 | 1.27 | g/cm3 | ASTM D792 |
收縮率 - 流動 (3.20 mm) | 0.20 到 0.50 | % | ASTM D955 |
吸水率 (24 hr, 23°C) | 0.13 | % | ASTM D570 |
| 硬度 | 額定值 | 單位制 | 測試方法 |
洛氏硬度 (R 級, 23°C) | 106 | ASTM D785 |
| 機械性能 | 額定值 | 單位制 | 測試方法 |
抗張強度 | ASTM D638 | ||
屈服, 23°C | 50.0 | MPa | |
斷裂, 23°C | 28.0 | MPa | |
伸長率 | ASTM D638 | ||
屈服, 23°C | 4.0 | % | |
斷裂, 23°C | 110 | % | |
彎曲模量 (23°C) | 2100 | MPa | ASTM D790 |
彎曲強度 (23°C) | 70.0 | MPa | ASTM D790 |
| 沖擊性能 | 額定值 | 單位制 | 測試方法 |
懸壁梁缺口沖擊強度 | ASTM D256 | ||
-40°C | 37 | J/m | |
23°C | 100 | J/m | |
無缺口懸臂梁沖擊 | ASTM D4218 | ||
-40°C | 無斷裂 | ||
23°C | 無斷裂 |
| 熱性能 | 額定值 | 單位制 | 測試方法 |
載荷下熱變形溫度 | ASTM D648 | ||
0.45 MPa, 未退火 | 70.0 | °C | |
1.8 MPa, 未退火 | 63.0 | °C | |
維卡軟化溫度 | 85.0 | °C | ASTM D1525 |
導熱系數 (23°C) | 0.19 | W/m/K |
| 注射 | 額定值 | 單位制 | |
干燥溫度 | 71 | °C | |
干燥時間 | 4.0 到 6.0 | hr | |
加工（熔體）溫度 | 249 到 271 | °C | |
模具溫度 | 16 到 38 | °C |
| 備注 |
| 1通過這些鏈接您能夠訪問供應商資料。我們盡量保證及時更新資料；不過您可以從供應商處了解新資料。 |
Revision History
添加到 Prospector： 2000年11月
上次更新： 2017/6/26
添加到 Prospector： 2000年11月
上次更新： 2017/6/26
此數據表中的信息由 UL Prospector 從該材料的生產商處獲得。UL Prospector 盡大努力確保此數據的準確性。 但是 UL Prospector 對這些數據值不承擔任何責任，并強烈建議在終選擇材料前，就數據值與材料供應商進行驗證。
簡繁切換