衡水一博工程橡膠有限公司

聚氨酯防水涂料生產廠家

聚氨酯防水涂料是由異氰酸酯、聚醚等經加成聚合反應而成的含異氰酸酯基的預聚體，配以催化劑、無水助劑、無水填充劑、溶劑等，經混合等工序加工制成的單組分聚氨酯防水涂料。

Polyurethane waterproof coating is made of isocyanate, polyether and so on. It is made of isocyanate based prepolymer. It is made of single component polyurethane waterproof coating, which is prepared by mixing catalyst, anhydrous agent, waterless filler and solvent.
該類涂料為反應固化型(濕氣固化)涂料、具有強度高、延伸率大、耐水性能好等特點。對基層變形的適應能力強。聚氨酯防水涂料是一種液態施工的單組分環保型防水涂料，是以進口聚氨酯預聚體為基本成份，無焦油和瀝青等添加劑。它是空氣中的濕氣接觸后固化，在基層表面形成一層堅固的堅韌的無接縫整體防膜。
This kind of coating is a reaction - curing type (wet gas curing) coating with high strength, high elongation and good water resistance. It has strong adaptability to the deformation of the base. Polyurethane waterproof coating is a single component environment-friendly waterproof coating constructed by liquid. It is made up of imported polyurethane prepolymer, and has no tar and asphalt additives. It is solidified after the moisture contact in the air, and forms a solid, tough, non - seaming film prevention film on the surface of the base.
(1) 能在潮濕或干燥的各種基面上直接施工
(1) direct construction on a variety of wet or dry base surfaces
(2) 與基面粘結力強，涂膜中的高分子物質能滲入到基面微細細縫內，追隨型強。
(2) and surface adhesion strong, polymer material in the coating film can seep into the surface of fine seam, following strong.
(3) 涂膜有良好的柔韌性，對基層伸縮或開裂的適應性強，抗拉性強度高。
(3) the coating has good flexibility, strong adaptability to expansion or cracking at the base, and high tensile strength.
(4) 綠色環保，無毒無味，無污染環境，對人身無傷害。

(4) green environmental protection, non-toxic and tasteless, pollution-free environment, no harm to the body.

聚氨酯防水涂料生產廠家

(5) 耐候性好，高溫不流淌，低溫不龜裂，優異的抗老化性能，能耐油、耐磨、耐臭氧、耐酸堿侵蝕。
(5) good weather resistance, no flow at high temperature, no cracking at low temperature, excellent anti aging properties, oil, wear resistance, ozone resistance, acid and alkali corrosion.
(6) 涂膜密實，防水層完整，無裂縫，無針孔、無氣泡、水蒸氣滲透系數小，既具有防水功能又有隔氣功能。
(6) the film is dense, waterproof layer is complete, no crack, no needle hole, no bubble, water vapor permeability coefficient is small, both waterproof function and gas function.
(7) 施工簡便，工期短，維修方便
(7) simple construction, short period of time and convenient maintenance
(8) 根據需要，可調配各種顏色
(8) a variety of colors can be allocated according to the needs
(9) 質輕，不增加建筑物負載
(9) light quality and no increase of building load
(1)單組份聚氨酯防水涂料
(1) one component polyurethane waterproof coating
單組份聚氨酯防水涂料是以異氰酸酯、聚醚為主要原料，配以各種助劑制成的反應型柔性防水涂料。該產品具有良好的物理性能，粘結力強，常溫濕固化。有的聚氨酯防水涂料涂刷出的膜有稍微發粘的情況，在性能達標的情況下，也屬于合格。
One component polyurethane waterproof coating is made of isocyanate and polyether as the main raw material, reaction type flexible waterproof coating prepared by mixing various additives. The product has good physical properties, strong bonding force and wet curing at normal temperature. Some polyurethane waterproof coating paint film has a slightly sticky situation, in the case of performance to meet the standard, it is also qualified.
一、性能、特點
Performance, characteristics
1. 產品具有高強度、高延伸率、高固含量、粘結力強。
1. products have high strength, high elongation, high solid content and strong cohesive force.
2.自然流平，延伸性好，能克服基層開裂帶來的滲漏。
2. natural flow and good extensibility can overcome the leakage caused by the crack at the base.
3.常溫施工，操作簡便，無毒無害，耐侯性、耐老化性能優異。
3. normal construction, the operation is simple, non-toxic, corrosion resistance, aging resistance.
4.施工方便，克服了雙組份聚氨酯防水涂料需計量攪拌的缺點，保證了產品質量穩定和工程的防水效果。
4. convenient construction, overcome the dual component polyurethane waterproof coating needs metering and mixing shortcomings, to ensure the quality of product stability and waterproof effect of the project.