衡水一博工程橡膠有限公司

單組份【聚氨酯密封膠】廠家 /價格/歡迎訂購

單組份聚氨酯密密封膠是一種無溶劑單組分室溫固化密封膠。該密封膠呈膏狀，可擠出或涂抹施工。有抗下垂性，嵌填垂直接縫和頂縫不流淌。固化后的膠層為橡膠狀，有彈性。對金屬、橡膠、木材、水泥構件、陶瓷、玻璃等有粘附性。密封膠是用來填充空隙(孔洞、接頭、接縫等)的材料，兼?zhèn)湔辰雍兔芊鈨纱蠊δ堋?

One component polyurethane sealant thick is a solvent free single component room temperature curing sealant. The sealant is paste and can be extruded or smeared. It has sagging resistance, and the vertical joint and the top seam are not flowing. The cured adhesive layer is rubbery and elastic. Adhesion to metals, rubber, wood, cement components, ceramics, glass, etc.. Sealant is used to fill voids (holes, joints, joints, etc.) of materials, both adhesive and sealing two functions.
本密封膠是一種無溶劑單組分室溫固化密封膠。該密封膠呈膏狀，可擠出或涂抹施工。有抗下垂性，嵌填垂直接縫和頂縫不流淌。固化后的膠層為橡膠狀，有彈性。對金屬、橡膠、木材、水泥構件、陶瓷、玻璃等有粘附性。密封膠是用來填充空隙（孔洞、接頭、接縫等）的材料，兼?zhèn)湔辰雍兔芊鈨纱蠊δ堋，F(xiàn)西南市場重慶信合塑膠在生產經營該類產品。

This sealant is a solvent-free, one component curable sealant at room temperature. The sealant is paste and can be extruded or smeared. It has sagging resistance, and the vertical joint and the top seam are not flowing. The cured adhesive layer is rubbery and elastic. Adhesion to metals, rubber, wood, cement components, ceramics, glass, etc.. Sealant is used to fill voids (holes, joints, joints, etc.) of materials, both adhesive and sealing two functions. The market in the southwest of Chongqing Xinhe plastic in the production of such products.

單組份【聚氨酯密封膠】廠家 /價格/歡迎訂購

聚氨酯密封膠廣泛用于土木建筑、交通運輸?shù)刃袠I(yè)：
Polyurethane sealant is widely used in civil engineering, construction, transportation and other industries:
1.在建筑方面的應用——門窗、玻璃等的填充密封；
1. application in Architecture -- filling seal of doors and windows and glass;
2.在土木方面的應用——高速公路、橋梁、飛機跑道等的嵌縫密封；
2. in civil applications, highways, bridges, runway caulking sealing;
3.在汽車方面的應用——車窗（主要是風擋玻璃）的裝配密封。
3. automotive applications - assembly seals for windows (mainly windshield).
密封膠是用來填充空隙（孔洞、接頭、接縫等）的材料，兼?zhèn)湔辰雍兔芊鈨纱蠊δ堋＞郯滨ッ芊饽z與硅酮密封膠、聚硫密封膠構成了目前密封膠的三大品種。
Sealant is used to fill voids (holes, joints, joints, etc.) of materials, both adhesive and sealing two functions. Polyurethane sealant and silicone sealant, polysulfide sealant constitute the current top grade sealant three varieties.
“單組分”主要是相對“雙組分”而言的，有一種雙組分聚氨酯膠，在使用的時候需要將A、B組分，按比例均勻地混合才能起到粘接密封的效果；而單組分則直接使用，方便、簡潔，施工簡便。“濕固化”是指，單組分聚氨酯膠是利用于空氣中的微量的水蒸氣反應而固化，與基材表面的活性基團反應起到粘接作用。
"Single component" is relative to "double component", there is a two-component polyurethane adhesive, when in use will need A, B component, according to the proportion of mixed evenly to adhesive sealing effect; while the single components used directly, convenient and simple, convenient construction. "Wet curing" means that a single component polyurethane adhesive is cured by a small amount of steam reaction in the air and acts as a bonding agent to the active group on the substrate surface.
與傳統的硅酮膠相比，聚氨酯膠具有3倍以上的高伸長率和2倍以上的粘接強度。
Compared with the traditional silicone adhesive, polyurethane adhesive has more than 3 times higher elongation and more than 2 times of bonding strength.
單組分聚氨酯膠完全固化后無毒，可以用于飲水工程，已經經過測試的。
One component polyurethane glue is nontoxic after being completely solidified. It can be used in drinking water engineering and has been tested by authority.